Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!samsung!uakari.primate.wisc.edu!uflorida!gatech!mcnc!thorin!ornat!ornat
From: ornat@ornat.cs.unc.edu (Steven Ornat)
Newsgroups: comp.sys.apple2
Subject: Printer question
Message-ID: <17413@thorin.cs.unc.edu>
Date: 9 Nov 90 06:11:29 GMT
Sender: news@thorin.cs.unc.edu
Lines: 22

Someone out in the net has run into this problem before so please help
me.

I want to put a parallel printer on a Apple //e clone (Laser 128) and I 
need to know how to make that cable. The Laser has a female DB-15 on the
back panel and the printer is a normal IBM type printer. 

The cable would be a DB-15 to a centronics connector. 

If someone knows what each pin on the DB-15 connector is for,  I do
have the manual on the printer so I can figure out what goes to 
where.

Thanks -- SteveO

#############################################################################
	Steven M. Ornat                            	
The University of North Carolina                    
Department  of  Computer Science		Telephone: (919) 962-1818
CB # 3175,  Sitterson Hall	     		      Fax: (919) 962-1799
Chapel Hill, NC 27599-3175			Internet: ornat@cs.unc.edu
#############################################################################