Path: utzoo!attcan!uunet!samsung!usc!apple!rutgers!cunixf.cc.columbia.edu!cunixa.cc.columbia.edu!cmm1
From: cmm1@cunixa.cc.columbia.edu (Christopher M Mauritz)
Newsgroups: comp.sys.atari.st
Subject: Re: Uniterm question
Message-ID: <1990Nov6.151348.17196@cunixf.cc.columbia.edu>
Date: 6 Nov 90 15:13:48 GMT
References: <5556@uqcspe.cs.uq.oz.au>
Sender: news@cunixf.cc.columbia.edu (The Daily News)
Organization: Columbia University
Lines: 22

In article <5556@uqcspe.cs.uq.oz.au> marshall@batserver.cs.uq.oz.au writes:
>I have a 1meg 1040ST, with TOS 1.0 :-(
>What buffer sizes should I set for Uniterm, if I want to run zmodem from
>within Uniterm? And which buffer goes with which size? Thanks.

Although you can run rz/sz with about 90K of memory, I would suggest giving
200-300K to them.  Just increase the buffer called SYSTEM to 200-300 and you
should be able to run these programs just fine.  All the extra memory gets
used for the history buffer anyway so you really only need to budget UniTerm
about 250K.

BTW, this is the BEST ST terminal package I have ever seen...bar none.

Enjoy!

Chris
------------------------------+---------------------------
Chris Mauritz                 |D{r det finns en |l, finns
cmm1@cunixa.cc.columbia.edu   |det en plan!
(c)All rights reserved.       |
Send flames to /dev/null      |
------------------------------+---------------------------