Path: utzoo!utgpu!cunews!bnrgate!bwdls61.bnr.ca!bwdls58!mlord
From: mlord@bwdls58.bnr.ca (Mark Lord)
Newsgroups: comp.sys.ibm.pc.misc
Subject: Re: Windows 3 AGAIN...
Message-ID: <4825@bwdls58.UUCP>
Date: 9 Nov 90 21:01:04 GMT
References: <9803@helios.TAMU.EDU> <3360001@hpsgwp.sgp.hp.com> <1990Nov8.205357.783@mccc.uucp>
Sender: mlord@bwdls58.UUCP
Reply-To: mlord@bwdls58.bnr.ca (Mark Lord)
Organization: Bell-Northern Research, Ottawa, Canada
Lines: 31

In article <1990Nov8.205357.783@mccc.uucp> pjh@mccc.edu (Pete Holsberg) writes:
>In article <3360001@hpsgwp.sgp.hp.com> plim@hpsgwp.sgp.hp.com (Peter Lim) writes:
>=Actually I lied ..... QEMM-386 5.1 will work too.
>
>Can you post the relevant part sof your AUTOEXEC.BAT and CONFIG.SYS?  I
>haven't been able to use Win3 in enhanced mode with QEMM 5.1 at all.

Look in the special pamphlet that came with QEMM 5.1 which is entirely
devoted to the topic of running windows with it installed.

Pretty simple, actually.  Delete EVERYTHING from your config.sys and try this:

FILES=30
BUFFERS=30
DEVICE=QEMM.SYS RAM NOSORT


The NOSORT parameter is not actually required, though one poster mentioned
that on HIS system, it WAS required.

Once you have it working, add things back to CONFIG.SYS one at a time
until it stops working, at which point you will identify the culprit.

Do NOT use HIMEM.SYS or EMM386.SYS !!

If you use SMARTDRV.SYS, please read the relevant portion of the QEMM pamphlet.
-- 
 ___Mark S. Lord__________________________________________
| ..uunet!bnrgate!mlord%bmerh724 | Climb Free Or Die (NH) |
| MLORD@BNR.CA   Ottawa, Ontario | Personal views only.   |
|________________________________|________________________|