Path: utzoo!attcan!uunet!munnari.oz.au!sirius.ucs.adelaide.edu.au!chook.ua.oz
From: sam@chook.ua.oz (Sam Sangster)
Newsgroups: comp.sys.mac.comm
Subject: Re: White Knight 11.08 vs System 6.0.7
Message-ID: <1773@sirius.ucs.adelaide.edu.au>
Date: 6 Nov 90 00:56:00 GMT
References: <1990Nov5.142630.12779@xn.ll.mit.edu>
Sender: news@ucs.adelaide.edu.au
Lines: 26
Nntp-Posting-Host: chook.ua.oz.au

From article <1990Nov5.142630.12779@xn.ll.mit.edu>, by delaney@xn.ll.mit.edu (John R. Delaney):
> I recently update my version of White Knight to 11.08. Then before I
> used it again, I update my system to 11.08. Now I am having a problem
> executing previously compiled procedures from a macro button and from
> the menu. The errors I get vary, but the most common is the request that
> I use "/pathname:filename". But I am using that. I have even used the
> "get procedure file" option when editing the macro button and still get
> the problem. 
> 
> Is this a known problem with WK 11.08 or with WK and System 6.0.7? Or
> have I just managed to trash WK in updating it?

I have 6.0.7, WK11.08, on a SE/30 8Mb RAM, 120Mb Quantum ProSeries, and have
had no problems, and I have many procedures for doing nearly everything.

My best guess is that the installer/you have changed some {disk,folder} name
somewhere along the path for the macro.

Cheers,
Sam Sangster                      |   Internet: sam@cs.adelaide.edu.au
University of Adelaide, Australia |   AppleLink: AUST0153
Apple Consortium                  |   Ph: 61 8 228 5441  Fax: 61 8 223 1206

Sam Sangster                      |   Internet: sam@cs.adelaide.edu.au
Apple Consortium		  |   AppleLink: AUST0153
University of Adelaide, Australia |   Ph: 61 8 228 5441  Fax: 61 8 223 1206