Path: utzoo!utgpu!watserv1!watmath!att!att!bu.edu!rpi!zaphod.mps.ohio-state.edu!usc!cs.utexas.edu!uunet!mnemosyne.cs.du.edu!mercury.cair.du.edu!news
From: tjreynol@zephyr.cair.du.edu (Tim)
Newsgroups: comp.unix.sysv386
Subject: 4 serial ports under Esix
Summary: can it be done?
Message-ID: <1990Nov3.020919.3937@mercury.cair.du.edu>
Date: 3 Nov 90 02:09:19 GMT
Sender: news@mercury.cair.du.edu (netnews)
Organization: University of Denver
Lines: 25

My 386 has Esix 3.2 C;
I currently have port 0 as a modem (and wouldn't you think ESIX would have
	explicit definitions for Everex modems?)
and port 1 as a mouse, and X11R3 apparently does not support ports 2 & 3..

I have a terminal I'd like to hang off of port 2, and another modem I'd
like to have as port 3;

my interrupts are :  port 0 - IRQ 4
		     port 1 - IRQ 5
		     port 2 - IRQ 2
		     port 3 - IRQ 3
		
goofy perhaps, but the modems won't tolerate much else,

anyway, the port driver only addresses tty00 and tty01 as far as i can tell

could someone knowledgeable point me in the right direction , at least,
or, even better :-)  tell me exactly how to arrange this ocnfigration!:-)

the terminal is an old ADDS Viewpoint, if it matters..

Thanks!
Tim
tjreynol@zephyr.cair.du.edu