Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!usc!elroy.jpl.nasa.gov!thyme!kaleb
From: kaleb@thyme.jpl.nasa.gov (Kaleb Keithley	)
Newsgroups: comp.unix.sysv386
Subject: Re: ESIX and RLL contollers
Message-ID: <1990Nov6.234606.5162@thyme.jpl.nasa.gov>
Date: 6 Nov 90 23:46:06 GMT
References: <1990Nov6.002853.582@medtron.medtronic.com>
Organization: Jet Propulsion Laboratory, Pasadena, CA
Lines: 20

In article <1990Nov6.002853.582@medtron.medtronic.com> dt4100c@medtron.medtronic.com (Derek Terveer) writes:
>In article <1990Oct10.232255.25221@metro.ucc.su.OZ.AU> glenn@suphys.physics.su.OZ.AU (Glenn Geers) writes:
>> 
>> 	just a quick question for someone familiar with ESIX. After having a look
>> through the installation guide for supported disk controllers I am led to 
>> believe that it will *not* support the WD1006VSR2 RLL controller (it's not
>> listed - they list WD1003 and WD1007). Is this correct?
>
>I have never been able to get rll controllers to work reliably with either rev c
>or rev d of esix.
>

I have *never* had a problem getting rev. c or rev. d of ESIX to work with my
WD1006 1:1 RLL controller.

-- 
Kaleb Keithley                      Jet Propulsion Labs
kaleb@thyme.jpl.nasa.gov

"So that's what an invisible barrier looks like!"