Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!uwm.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!usc!elroy.jpl.nasa.gov!ames!uhccux!uhunix1.uhcc.Hawaii.Edu!todd
From: todd@uhunix1.uhcc.Hawaii.Edu (Todd Ogasawara)
Newsgroups: comp.windows.ms
Subject: Re: WFW Update.
Message-ID: <10021@uhccux.uhcc.Hawaii.Edu>
Date: 25 Oct 90 18:02:14 GMT
References: <1990Oct18.212537.27691@sbcs.sunysb.edu> <10471.2725905e@pbs.org>
Sender: news@uhccux.uhcc.Hawaii.Edu
Distribution: usa
Organization: University of Hawaii
Lines: 19

In article <10471.2725905e@pbs.org> rfutscher@pbs.org writes:
]          I have a problem printing useing postscript. When I use
]dingbats, W4W adds extra space between that line and the following 
]line and less space before the line. Microsoft said the work around
]was to add a non-breaking space. The work around dosn't work. They
]also said that the problem wasn't fixed in version 1.1. Of course 
]page preview dosn't show the problem.

I had that problem too a while back.. A friend suggested a "fix" that
worked for me: replace your PSCRIPT.DRV with something newer (assuming you
are using an old version of Windows/386 2.11). On the other hand, if you
are using WfW with Windows 3.0, I'm not sure what the problem is since I
don't have any problems with that version of Windows/Dingbats/Postscript.

--
Todd Ogasawara, U. of Hawaii
UUCP:		{uunet,ucbvax,dcdwest}!ucsd!nosc!uhunix!todd
BITNET:		todd@uhunix
INTERNET:	todd@uhunix.UHCC.HAWAII.EDU