Path: utzoo!censor!geac!torsqnt!news-server.csri.toronto.edu!cs.utexas.edu!usc!elroy.jpl.nasa.gov!decwrl!hayes.ims.alaska.edu!accuvax.nwu.edu!nucsrl!telecom-request
From: vances@xenitec.on.ca (Vance Shipley)
Newsgroups: comp.dcom.telecom
Subject: Re: A Phone Set Wiring Question
Message-ID: <14633@accuvax.nwu.edu>
Date: 12 Nov 90 17:44:22 GMT
Sender: news@accuvax.nwu.edu
Organization: SwitchView - The Linton Technology Group
Lines: 14
Approved: Telecom@eecs.nwu.edu
X-Submissions-To: telecom@eecs.nwu.edu
X-Administrivia-To: telecom-request@eecs.nwu.edu
X-Telecom-Digest: Volume 10, Issue 815, Message 7 of 8


In article <14566@accuvax.nwu.edu> "Dave W. Hamaker" <dwh@twg.com>
writes:

>The phone seems to be made by COMDIAL and the black wire was connected
>to a terminal labeled "L1," while the yellow wire was connected to a
>terminal labeled "G."  I can give more detailed info on the device if
>I know what to look for.  Any ideas?

The telephone has been set up for A&A1 control.  This is to interwork
with a key telephone system, see last months postings on A&A1.


vance