Path: utzoo!attcan!uunet!bu.edu!att!emory!hubcap!ncrcae!ncr-sd!simasd!simasd!pnet07!donm
From: donm@pnet07.cts.com (Don Maslin)
Newsgroups: comp.os.cpm
Subject: Re: Kaypro II-84: SSDD to DSDD Change
Message-ID: <1990Nov8.194503.18866@simasd.uucp>
Date: 8 Nov 90 19:45:03 GMT
Sender: pnet@simasd.uucp (People-NET)
Organization: People-Net [pnet07], San Diego, CA
Lines: 38

donm@hpnmdla.HP.COM (Don Montgomery) writes:
>This may have been asked many times previously, but I missed it-
>
>I have a "stock" Kaypro II-84 with 191K SSDD drives.  What do I need to convert
>to DSDD drives besides the drives themselves? (The originals are indeed single-
>sided, one head with a rubbing block on the other side.)  Does anyone have the
>code for the monitor ROM changes?  What other hardware changes are required, if
>any?  With the demise of MICROCORNUCOPIA magazine and the advent of MS/DOS, all
>the advertisers for this sort of thing have disappeared.
>
>Can anyone offer any help?              Thanks
>
While it is true that uC magazine is gone (and much lamented), they are still
selling their products for Kaypro and other CP/M machines.  A friend recently
purchased their PRO 884 MAX ROM for his KP-4/84.  uC also markets a decoder
board to permit up to four floppy drives on the KP.  Their mail address is:
                
                        Micro Cornucopia, Inc.
                        P.O. Box 223
                        Bend OR 97709

Another possible source of KP stuff is:

                        Emerald Microware
                        P.O. Box 1726
                        Beaverton OR 97075
                        503/641-8088

                        Advent Products, Inc.
                        3154-F East La Palma Ave
                        Anaheim CA 92806
                        714/630-0446

Good luck.

Keeper of the CP/M System Disk | UUCP: {nosc ucsd crash ncr-sd}!pnet07!donm
Archives for the Dino(saur)SIG | ARPA: simasd!pnet07!donm@nosc.mil
- San Diego Computer Society - | INET: donm@pnet07.cts.com