Xref: utzoo comp.protocols.pcnet:94 comp.unix.sysv386:2129
Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!julius.cs.uiuc.edu!ux1.cso.uiuc.edu!news.cs.indiana.edu!iuvax!mikes
From: mikes@iuvax.cs.indiana.edu (Michael Squires)
Newsgroups: comp.protocols.pcnet,comp.unix.sysv386
Subject: Re: Netware 386 tcp/ip link to SCO Unix
Summary: NCSA 2.3 b11 works
Keywords: SCO TCP/IP & NCSA Telnet
Message-ID: <71800@iuvax.cs.indiana.edu>
Date: 14 Nov 90 19:38:26 GMT
References: <9025@pitt.UUCP> <1990Nov13.180514.14393@momenta>
Organization: Indiana University, Bloomington
Lines: 18

In article <1990Nov13.180514.14393@momenta> gregpf@momenta (Greg Presedo-Floyd) writes:

>the following. (1) Install tcp/ip on the SCO Unix 486.  (2) Try to use
>the same "telnet" I am using now from my PC to get to the 486.  You
>didn't say which "SVR3 Unix" you were running, but this should work.
>

I'm currently sending this message from an AST 286 PC with WD8003E card
running under DESQView connected via NCSA Telnet 2.3 beta 11 to an
SCO ODT (SCO UNIX 3.2.1) 486 box.

"ftp" from the SCO box to the PC also works fine (when NCSA Telnet is
running in server mode).
-- 

Mike Squires (mikes@iuvax.cs.indiana.edu)     812 855 3974 (w) 812 333 6564 (h)
mikes@iuvax.cs.indiana.edu          546 N Park Ridge Rd., Bloomington, IN 47408
Under construction: mikes@sir-alan@cica.indiana.edu