Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!van-bc!ubc-cs!alberta!herald.usask.ca!news
From: macphed@dvinci (Ian MacPhedran)
Newsgroups: comp.protocols.tcp-ip.ibmpc
Subject: Re: Problem with NCSA release 2.3b11 of FTP program.
Message-ID: <1990Nov15.001726.3569@herald.usask.ca>
Date: 15 Nov 90 00:17:26 GMT
References: <1990Nov2.003502.2927@athena.mit.edu>
Sender: news@herald.usask.ca (USENET News System)
Reply-To: macphed@dvinci
Organization: University of Saskatchewan
Lines: 20

From article <1990Nov2.003502.2927@athena.mit.edu>, by drk@athena.mit.edu (David R Kohr):
> I have just gotten version 2.3b11 of NCSA Telnet up and running,
> and everything seems pretty good, except for a serious problem
> I've encountered with the FTP program: when I log in and do
> a "put" command to transfer from my PC to a Sun host (running
> Sun/OS 4.0.3), about two hashmarks ("#") appear, then the transfer
> hangs up.
> ... 
> Have I encountered a new or known bug, or is there perhaps
> something wrong with my configuration?
> 
I seem to have the same problem here with this release. The transfer fails
both with the 3C501 and decnet drivers (built-in drivers).

I would say there is a bug still here.

Ian.

Ian MacPhedran, Engineering Computer Centre, University of Saskatchewan.
2B13 Engineering Building, U. of S. Campus, Saskatoon, Sask., CANADA S7N 0W0
macphed@dvinci.USask.CA  macphedran@sask.USask.CA  macphedran@sask.BITNET
--
Ian MacPhedran, Engineering Computer Centre, University of Saskatchewan.
2B13 Engineering Building, U. of S. Campus, Saskatoon, Sask., CANADA S7N 0W0
macphed@dvinci.USask.CA  macphedran@sask.USask.CA  macphedran@sask.BITNET