Path: utzoo!attcan!uunet!cs.utexas.edu!usc!zaphod.mps.ohio-state.edu!ub!ubvmsb.cc.buffalo.edu!v089pfrb
From: v089pfrb@ubvmsb.cc.buffalo.edu (Jeffrey C Murphy)
Newsgroups: comp.sys.amiga.tech
Subject: 1084 auto de-interlace
Message-ID: <45610@eerie.acsu.Buffalo.EDU>
Date: 11 Nov 90 21:55:33 GMT
Sender: news@acsu.Buffalo.EDU
Reply-To: v089pfrb@ubvmsb.cc.buffalo.edu
Organization: University at Buffalo
Lines: 8
Nntp-Posting-Host: ubvmsb.cc.buffalo.edu
News-Software: VAX/VMS VNEWS 1.3-4.3


  I seem to have a problem with my 1084. A few minutes after turning it
on my workbench (which is interlaced) deinterlaces and becomes very 
difficult to read. About ten minutes later it will shake up and down and then 
re-interlace itself.
 Is this a problem with the 1084 or with the amiga (b2000)?

Please Respond by EMAIL... Thanx    Jeff.