Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!maverick.ksu.ksu.edu!hoss!fergvax!252u3130
From: 252u3130@fergvax.unl.edu (Phil Dietz)
Newsgroups: comp.sys.amiga.tech
Subject: Probs with System() and ctrl-c's
Message-ID: <1990Nov16.220256.8200@hoss.unl.edu>
Date: 16 Nov 90 22:02:56 GMT
References: <micke.98939@slaka.sirius.se>
Sender: news@hoss.unl.edu (Network News Administer)
Organization: Comp Sci and Engr, Univ. of Nebr.
Lines: 17

I'm invoking dos commands via system() with my Lattice 5.04 compiler.
Every so often, the dos command (zoo) will go into an infinte loop
spewing out file xxx  - skipping.....
 
Well, no matter what break signal I send (ctrl-c, d, e, f, \) it just
wont break.
 
Is there away to be able to pass a ctrl-c break to a command that was
executed VIA system()???
 
Phil Dietz


<<<=================--------- Cheap Ad ---------===================<<<
Phil Dietz                       SWL Lincoln    565 MEGS! 2 lines
252u3130@fergvax.unl.edu         (402)421-1963  AMIGA, IBM, MAC, GIFS
    IBM'ers and Mac'ers are shopping for a life.  Amiga the best!