Path: utzoo!attcan!uunet!samsung!sdd.hp.com!ucsd!ucbvax!gnh-applesauce.cts.com!scottr From: scottr@gnh-applesauce.cts.com (Scott Rothstein) Newsgroups: comp.sys.apple2 Subject: SCSI.Part Message-ID: Date: 12 Nov 90 16:23:37 GMT Sender: daemon@ucbvax.BERKELEY.EDU Organization: The Internet Lines: 21 X-Unparsable-Date: Sun Nov 11 90 at 11:44:37 (EST) Odd -- I installed 5.0.3 on my HD, and suddenly SCSI.Part wasn't there. "Ok," I thought, "it just erased the file and replaced it with an update, or found it nonstandard (patched) and updated it." So I ran SCSI.Part.Install, and patched P8 and Start.GS.OS Didn't work. Booted Proterm, and it crashed. Tried other P8 programs, and it crashed. Had to replace P8 and Start.GS.OS and it worked, unpatched. I know that SCSI.Part patches P8 to read more partitions, and then patches Start.GS.OS to allow the greater file length that P8 now has without giving an error. Any Ideas? I really need access to my other two partition from P8. ////////////////////////////////////\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ \ Internet: scottr@applesauce.cts.com /\ ts'hahl: /\ 'tis but / / AKA: Monte \/ no retreat \/ a scratch \ \ America Online: ScottR2 /\ no surrender /\ -- M.P. / /----------------------------------------------------------------------\ \ Once upon a midnight dreary, while I pondered, weak and weary, / / -- Edgar Allan Poe \ \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\////////////////////////////////////