Path: utzoo!attcan!uunet!zaphod.mps.ohio-state.edu!pacific.mps.ohio-state.edu!linac!att!emory!gatech!ncsuvx!news
From: rnf@hobbes.ncsu.edu (Rick Fincher)
Newsgroups: comp.sys.apple2
Subject: Re: RAMFast problems!!!
Message-ID: <1990Nov12.225538.16694@ncsuvx.ncsu.edu>
Date: 12 Nov 90 22:55:38 GMT
References: <3999@idunno.Princeton.EDU>
Sender: news@ncsuvx.ncsu.edu (USENET News System)
Organization: NCSU Computing Center
Lines: 25

kadickey@phoenix.Princeton.EDU (Kent Andrew Dickey) writes:


>It doesn't work with AppleTalk!!!

>How do I know it's Appletalk?  Everything works great form P8.  No
>problems.  I try to boot GSOS, and about half way through the boot (just
>about the time it would be loading the Laserwriter drivers), it crashes
>into the monitor with an infinite number of BRKs/COPs/etc.  (as in, it
>continues to beep...like interrupts are causing the problem.  Hint
>hint).  If I simply go to the control panel (thank god for Ctrl-Ap-ESC),
>set slot 7 to 'my card' and reboot, everything works great (except that
>I can't print from AWGS...).

I use mine with AppleTalk all the time.  It sounds like you are trying
to run AppleTalk and the RamFast out of slot 7.  You cannot use slot 7
for AppleTalk and for a card at the same time (not with this card
anyway).

Rick Fincher
rnf@hobbes.catt.ncsu.edu


>			Kent Dickey
>kadickey@phoenix.Princeton.EDU