Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sun-barr!apple!julius.cs.uiuc.edu!zaphod.mps.ohio-state.edu!pacific.mps.ohio-state.edu!ohstpy!miavx1!rlcollins
From: rlcollins@miavx1.acs.muohio.edu (Ryan 'Gozar' Collins)
Newsgroups: comp.sys.atari.st.tech
Subject: Using an AppleColor RGB monitor with a ST
Message-ID: <2870.27400aa0@miavx1.acs.muohio.edu>
Date: 13 Nov 90 20:00:47 GMT
Lines: 41

I would like to take my ST to work with me, but I hate lugging my monitor 
around. At work we have two Apple IIgs's with a RGB monitor. Here are the 
specs on it:

Scanning Frequencies:		NTSC/60
	horizontal		 15.734 kHz
	vertical		 60 Hz

This seems to be in the right specs, the only problem is the cable. Here 
are the pinouts:

Pin	Function
1	Red Video ground
2	Red composite video
3	composite sync
4	not used
5	green composite video
6	green video ground
7	not used
8	not used
9	blue composite video
10	not used
11	not used
12	not used
13	blue video ground
14	not used
15	not used
Shell	Shield ground

I have no idea how to come up with a cable so I can use it.

~~~~~~~~~~~~~~~~~~~~~~~~~ Ryan 'Gozar' Collins ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
            o__)\			     rlcollins@miavx1.BITNET
           /     )			      RC1DSANU@miamiu.acs.muohio.edu
          /     /  ____                       R.COLLINS1  (On GEnie)
         /(____/__(_) o)_/
                      /)			[ || ]   Atari Computers,
      "There is no Substitute."                 [ || ]    They're not just
 Vs lbh pna ernq guvf, lbh'er geniryvat        // || \\   for breakfast 
            gbb pybfr!                        //  ||  \\  anymore
~~~~~~~~~~~~~~~~~~~~~~Yea, right, thats what I said.~~~~~~~~~~~~~~~~~~~~~~~~~