Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!sdd.hp.com!hplabs!hpcc05!col!hpldola!hp-lsd!bob
From: bob@hp-lsd.COS.HP.COM (Robert D. Gronlund)
Newsgroups: comp.sys.hp
Subject: Re: hp64000 cross compiler
Message-ID: <8250034@hp-lsd.COS.HP.COM>
Date: 12 Nov 90 17:15:56 GMT
References: <1990Nov8.204437.8125@resrch.molienergy.bc.ca>
Organization: HP Logic Systems Division - ColoSpgs, CO
Lines: 13


There are no plans to port the original HP64000 compilers to the
S800 RISC workstations.  These compilers are discontinued and have been
replaced by our newer Advanced Cross Language System (AxLS) compilers
which ARE available on S800 RISC machines.  However, AxLS does not
support the targets that you are using and there are currently no
plans to do so (AxLS supports 68xxx and 808x processor families).

If you need to move from your S500 to an S800 then you will need to 
either change microprocessor or change to a non-HP compiler.

Hope this helps,
Bob Gronlund