Path: utzoo!attcan!uunet!mcsun!hp4nl!ruuinf!praxis!hrbaan From: hrbaan@praxis.cs.ruu.nl (Hayo Baan) Newsgroups: comp.sys.ibm.pc.hardware Subject: Re: MS-DOS 3.3 or 4.01? Message-ID: <4260@ruuinf.cs.ruu.nl> Date: 12 Nov 90 09:20:34 GMT References: <71077@iuvax.cs.indiana.edu> Sender: news@ruuinf.cs.ruu.nl Lines: 40 In <71077@iuvax.cs.indiana.edu> beckman@iuvax.cs.indiana.edu (Peter Beckman) writes: ->I'm building a 386 system. Do I want to buy MS-DOS 3.3 or 4.01? ->Thanks for your help. -Pete -> ->beckman@copper.ucs.indiana.edu As I am using a 386 + VGA system my self, I have the following to say : You'll probably want the 4.01 for the extra features such as : - > 32MEG partitions, - being able to set yer screen to 50 (if yer using VGA) or 43 (if yer using EGA) lines by just using the mode command. - Nicer/improved commands, such as MEM, which shows allot more debug info than the old 3.3 version! - ... (There are more advantages, but I can't think of them right now) There are some disadvantages as well : - It takes up more memory than 3.3. (This didn't bother me much, although I had to adjust some parameters of the AUTOCAD program...) - ... (You'll get some more from other posts) One more thing that I found out is that if you're using 4.01 it is a major set back if you have to be working on a machine with 3.3 installed. Concluding : USE 4.01 instead of 3.3 PS. I've heard of DOS 5.0 which can allmost be completely installed in EXPANDED/EXTENDED memory, but I am not sure that it is availlable yet -- +------------------+-----------------------------------------------------+ | Hayo R. Baan | E-Mail : hrbaan@cs.ruu.nl | | Oudwijkerlaan 34 |-----------------------------------------------------| | 3581 TD UTRECHT | | | The Netherlands | A program is like a nose; | | | Sometimes it runs, sometimes it blows. | | Tel. 030-515586 | | +------------------+-----------------------------------------------------+