Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!gatech!udel!haven!mimsy!mojo!russotto
From: russotto@eng.umd.edu (Matthew T. Russotto)
Newsgroups: comp.sys.mac.hardware
Subject: Re: Summary:  Adding 2nd hard drive to II(,x,fx)
Message-ID: <1990Nov10.200717.19823@eng.umd.edu>
Date: 10 Nov 90 20:07:17 GMT
References: <1228@helens.Stanford.EDU>
Sender: news@eng.umd.edu (The News System)
Organization: College of Engineering, Maryversity of Uniland, College Park
Lines: 26

In article <1228@helens.Stanford.EDU> news@helens.Stanford.EDU (news) writes:
>Thanks to all those who responded.  There were many suggestions,
>most including tie wraps or velcro to hold the new drive in.
>One pointed out that I had asked for a "double headed SCSI cable"
>which is a "BAD IDEA" due to ringing.  Poor terminology --- I had

Hmm-- I think I understand the difference, but I want to be sure (because
I want to get one of these myself). This is bad:

        /=
-------/
       \
        \=

(where '=' is the connector),

but THIS

----=----=

is OK (assuming the drive attached to the second connector is terminated,
and there is termination on the other end somewhere.)

--
Matthew T. Russotto	russotto@eng.umd.edu	russotto@wam.umd.edu
Tax the rich, and feed the poor -- until there are, rich no more.