Xref: utzoo comp.sys.mac.system:2175 comp.sys.mac.hardware:6594
Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!munnari.oz.au!uhccux!bmartin
From: bmartin@uhccux.uhcc.Hawaii.Edu (Brian Martin)
Newsgroups: comp.sys.mac.system,comp.sys.mac.hardware
Subject: How do I get a LaserWriter IINTX to recognize additional RAM?
Message-ID: <10251@uhccux.uhcc.Hawaii.Edu>
Date: 11 Nov 90 20:21:00 GMT
Reply-To: martin@medix.pegasus.com (Brian K. Martin, M.D.)
Followup-To: comp.sys.mac.system
Organization: martin Infromation Systems, Ltd.
Lines: 20

I just added 4 1MB NTX simms to my LW IINTX, and it wouldn't recognize them.
I tried switching the 1 MB simms to Bank 0, and the 256k simms to bank 2,
and that got the NTX to recognize 5MB. But how do I get it to recognize the
remaining 1 MB in bank 2? Is there a resistor to cut, a jumper to install, a
postscript command to send?? Please reply to me at martin@medix.pegasus.com, as the account I'm posting from evaporates soon.

Thanks,

====
    Brian K. Martin, M.D.
    President and CEO 
    Martin Information Systems, Ltd.
    1103 9th Avenue, Suite 203
    Honolulu, Hawai`i 96816-2403
    Voice (808) 733-2003
    Fax (808) 733-2011

INTERNET: martin@medix.pegasus.com
ARPA: uhccux!bmartin@nosc.MIL
UUCP: {uunet,dcdwest,ucbvax}!ucsd!nosc!uhccux!bmartin