Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!usc!snorkelwacker.mit.edu!bloom-beacon!eru!hagbard!sunic!lth.se!newsuser
From: roland@dna.lth.se (Roland Mansson)
Newsgroups: comp.sys.mac.hardware
Subject: Re: Apple HD SC Setup Interleave?
Message-ID: <1990Nov15.133906.19857@lth.se>
Date: 15 Nov 90 13:39:06 GMT
References: <5189@crystal9.UUCP>
Sender: newsuser@lth.se (LTH network news server)
Distribution: comp
Organization: Lund University Computing Center, Sweden
Lines: 15

In article <5189@crystal9.UUCP> derosa@motcid.UUCP (John DeRosa) writes:
>It would appear that the Apple supplied tool HD SC Setup, 
>automatically knows what computer the drive is being 
>initialized from so that it can set the proper interleave.
>
>My question is, how do you bypass the default interleave?
>I know that I read how it could be done but I cannot remember
>the keyboard combination to do it.
>
Try command-I in the main dialog.
-- 
Roland Mansson, Lund University Computing Center, Box 783, S220 07 Lund, Sweden
Phone: +46-46107436   Fax: +46-46138225   Bitnet: roland_m@seldc52
Internet: roland.mansson@ldc.lu.se   or   roland.mansson%ldc.lu.se@uunet.uu.net
UUCP: {uunet,mcvax}!sunic!ldc.lu.se!roland.mansson    AppleLink: SW0022