Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!ucsd!scubed!dan From: dan@s3sol.scubed (Dan Peterka) Newsgroups: comp.sys.mac.hardware Subject: Tips needed on adding 2nd internal hard disk to a Mac II Message-ID: Date: 15 Nov 90 21:23:26 GMT Sender: usenet@scubed.SCUBED.COM Distribution: comp Organization: /users/csd/dan/.organization Lines: 23 We have had to remove a 40 MB disk out of a IIsi and I would like to make this disk a second internal drive on an old Mac II. I'll simply screw this Conner drive into the chassis where the second floppy would go. I'll also need to set the SCSI ID jumpers on the Conners (Anyone know off hand what the jumper settings are on these? CP3040A's) and deal with the terminators. I'd like to know what I have to do wrt to power and SCSI ribbon cable though. Can I simply make Y cables or should they be Daisy-chained? Are there off-the-shelf kits to do this? Disk 1 Disk 2 Disk 1 Disk 2 | | |______| \ / OR: \ How about the power cables? \/ \ SCSI Conn SCSI Conn -- _________________________________________________________________________ Dan Peterka S-CUBED 3398 Carmel Mtn Rd. dan@scubed.scubed.com (619) 587-8338 San Diego, CA 92121 _________________________________________________________________________