Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!hellgate.utah.edu!caen!uakari.primate.wisc.edu!uflorida!haven!mimsy!mojo!russotto From: russotto@eng.umd.edu (Matthew T. Russotto) Newsgroups: comp.sys.mac.hardware Subject: Re: Tips needed on adding 2nd internal hard disk to a Mac II Message-ID: <1990Nov16.054632.17183@eng.umd.edu> Date: 16 Nov 90 05:46:32 GMT References: Sender: news@eng.umd.edu (The News System) Distribution: comp Organization: College of Engineering, Maryversity of Uniland, College Park Lines: 17 In article dan@s3sol.scubed (Dan Peterka) writes: >I'd like to know what I have to do wrt to power and SCSI ribbon cable >though. Can I simply make Y cables or should they be Daisy-chained? >Are there off-the-shelf kits to do this? > > Disk 1 Disk 2 Disk 1 Disk 2 > | | |______| > \ / OR: \ How about the power cables? > \/ \ > SCSI Conn SCSI Conn The second one. Make sure that disk 2 is terminated and disk 1 is not. I think you can use a Y with the power. -- Matthew T. Russotto russotto@eng.umd.edu russotto@wam.umd.edu .sig under construction, like the rest of this campus.