Xref: utzoo comp.unix.sysv386:2163 comp.unix.xenix.sco:745
Path: utzoo!attcan!uunet!wuarchive!zaphod.mps.ohio-state.edu!rpi!crdgw1!sixhub!davidsen
From: davidsen@sixhub.UUCP (Wm E. Davidsen Jr)
Newsgroups: comp.unix.sysv386,comp.unix.xenix.sco
Subject: Re: SCO Unix 3.2.2 with an Adaptec 1542B SCSI and Xabyte Tape Drive
Keywords: Adaptec,SCO Unix3.2.2,Xabyte,Tape Drive
Message-ID: <2303@sixhub.UUCP>
Date: 15 Nov 90 03:34:28 GMT
References: <17499@yunexus.YorkU.CA>
Reply-To: davidsen@sixhub.UUCP (bill davidsen)
Followup-To: comp.unix.sysv386
Organization: *IX Public Access UNIX, Schenectady NY
Lines: 22

In article <17499@yunexus.YorkU.CA> andrew@nexus.YorkU.CA (Andrew Kleiman) writes:
| 
| Has anyone installed a Adaptec 1542B SCSI controller with a 
| Xabyte Tape Drive in SCO Unix 3.2.2 system.  I'm having a very hard             time getting the darn tape unit
| to work.  All I get when I issue a tape command is 
| 
| Warning Stp Inquiry failed
| Warning aha: No controller response 

| Does anyone know the proper setting for the Adaptec card (ie DMA,INT,etc)

  You also have to set the device addresses. Some kernels want the
controller at 0 and the drive at 7, some something else, some want the
drive first, other last, yecch! I could look this up the manual and type
it in, but I won't spoil your fun.

  Anyway, that's probably what it is.
-- 
bill davidsen - davidsen@sixhub.uucp (uunet!crdgw1!sixhub!davidsen)
    sysop *IX BBS and Public Access UNIX
    moderator of comp.binaries.ibm.pc and 80386 mailing list
"Stupidity, like virtue, is its own reward" -me