Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!rice!uw-beaver!zephyr.ens.tek.com!ogicse!plains!tjon
From: tjon@plains.NoDak.edu (Christopher C. Tjon)
Newsgroups: comp.windows.ms
Subject: IRQ's and windows terminal--HELP!
Message-ID: <6830@plains.NoDak.edu>
Date: 16 Nov 90 17:46:16 GMT
Organization: North Dakota State University, Fargo
Lines: 20

Can anyone tell me if it is possible to make Terminal work on a system where
there are 2 com ports and an internal modem.  The com ports are set with
IRQ 4 and 3 respectively.  The modem is com 3 and IRQ 5.  I have yet to make
any microsoft communications (ie kermit, terminal etc) work under this setup
but do two the need for two active com ports and a modem the IRQs are set in
the only combination which they will work.  If I change the IRQ on the modem
to 3 or 4 it conflicts with and blocks out use of the respective com port.
Any Idea how I can make Terminal (or kermit for that matter) run on an
internal modem set at IRQ 5.

Please Email Responses

Thanks in advance

:
-- 
Chris Tjon
      UUCP:     	...!uunet!plains!tjon        Box 5224 
      BITNET:   	tjon@plains.bitnet           Fargo ND 58105-5224  
      INTERNET:   	tjon@plains.NoDak.edu        701-232-7678