Path: utzoo!utgpu!watserv1!watmath!att!dptg!ulysses!andante!mit-eddie!wuarchive!sdd.hp.com!ucsd!ogicse!pdxgate!jove!wendy
From: wendy@jove.cs.pdx.edu (Wendy Wilhelm)
Newsgroups: comp.os.mach
Subject: Re: Mach 2.5 on i386 -- HW requirements
Message-ID: <732@pdxgate.UUCP>
Date: 21 Nov 90 05:53:02 GMT
Sender: news@pdxgate.UUCP
Reply-To: wendy@jove.UUCP (Wendy Wilhelm)
Lines: 19

In article <36800@nigel.ee.udel.edu> danson@udel.edu () writes:
>I read recently on the hardware requirements for Mach 2.5 on a
>i386 platform.  I have a couple of questions:
>
>2.  Has X been modified to run on Mach i386 yet?

	I don't know about X being modified, but we got it up and running
	on an Intel 302 running Mach2.5. We're using it as the Xterminal
	server. The major change (other than flags) was to create the mach.cf 
	file and the "mach" types....


								Wendy

-------------------------------------------------------------------------------
Wendy Wilhelm
Portland State University, CS dept.       	               wendy@cs.pdx.edu
PO Box 751, Portland, OR  97207         {ucbvax, uunet}!tektronix!pdxgate!wendy
-------------------------------------------------------------------------------