Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!isis!bscott
From: bscott@isis.cs.du.edu (Ben Scott)
Newsgroups: comp.sys.amiga
Subject: Re: hard drive problems/VirusX
Summary: RTFM if you please
Keywords: READ/WRITE ERRORS--COLD VECTOR != 0
Message-ID: <1990Nov19.061411.15405@isis.cs.du.edu>
Date: 19 Nov 90 06:14:11 GMT
References: <4938@tahoe.unr.edu> <17609@thorin.cs.unc.edu>
Reply-To: bscott@isis.UUCP (Ben Scott)
Distribution: na
Organization: The Raster Image
Lines: 16

In article <17609@thorin.cs.unc.edu> oliver@solaria.cs.unc.edu (Bill Oliver) writes:
>I get a similar thing with my 2500/30.  I have VirusX in my startup-sequence,
>and it always comes up with a similar message and asks if I want to 
>clear this vector.  The only thing I noticed was that if I chose "Yes,"

  Setpatch r in your startup changes the vector so that RAD can survive
in a 1-meg Agnus system.  This annoys VirusX unless you run it with the -r
option AS DOCUMENTED IN THE DOC FILE...  

.                            <<<<Infinite K>>>>

-- 
|Ben Scott, professional goof-off and consultant at The Raster Image, Denver|
|FIDO point address 1:104/421.2, bscott@isis.cs.du.edu, or BBS (303)424-9831| 
|"Spent 4 hours burying the cat!"  "Four || The Raster Image IS responsible |
| hours?!?"  "It wouldn't keep still..." || for everything I say! | *Amiga* |