Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sun-barr!ames!uhccux!munnari.oz.au!bruce!labtam!eyrie!phoenix!dweaver From: dweaver@phoenix.pub.uu.oz.au (Justin Deeley) Newsgroups: comp.sys.amiga.hardware Subject: Re: Pinouts needed for A1000 video port Message-ID: <1990Nov19.055555.4240@phoenix.pub.uu.oz.au> Date: 19 Nov 90 05:55:55 GMT References: Organization: Phoenix ComSystem. Public UNIX Melbourne Australia. Lines: 39 In papp@remus.rutgers.edu (papp) writes: >I am trying to hook up a 1080 monitor to an Amiga 1000, but have lost >the cable. Can anyone tell me what pins go to where? I know I need >to get a DB-23 connector, but other than that, I am not too sure of >myself. ____ Here are the pin-out for the RGB port - Pin Name Description 1 XCLK EXTERNAL CLOCK 2 XCLKEN EXTERNAL CLOCK ENABLE 3 RED ANALOG RED 4 GREEN ANALOG GREEN 5 BLUE ANALOG BLUE 6 DI DIGITAL INTENSITY 7 DB DIGITAL BLUE 8 DG DIGITAL GREEN 9 DR DIGITAL RED 10 CSYNC COMPOSITE SYNC 11 HSYNC HORIZONTAL SYNC 12 VSYNC VERTICAL SYNC 13 GNDRTN RETURN FOR XCLKEN 14 ZD ZERO DETECT 15 C1 CLOCK OUT 16 GND GROUND 17 GND GROUND 18 GND GROUND 19 GND GROUND 20 GND GROUND 21 -5V - 5 VOLTS POWER (50 mA) 22 +12V + 12 VOLTS POWER (175 mA) 23 -12V - 12 VOLTS POWER (300 mA) I hope that these are of some use to you... Justin Deeley