Path: utzoo!utgpu!watserv1!watmath!att!att!linac!pacific.mps.ohio-state.edu!zaphod.mps.ohio-state.edu!wuarchive!udel!haven!decuac!lemans.dec.com!shlump.nac.dec.com!ryn.esg.dec.com!hollie.rdg.dec.com!decvax.dec.com!zinn!ubbs-nh!wa1omm!paul From: paul@wa1omm.UUCP (Paul MacDonald) Newsgroups: comp.sys.amiga.tech Subject: Re: VLT/Supra 2400zi modem0.device bug Message-ID: Date: 18 Nov 90 09:12:52 GMT References: <1990Nov9.234629.24885@opusc.csd.scarolina.edu> Lines: 29 >In article <1990Nov9.234629.24885@opusc.csd.scarolina.edu> yarnall@opusc.csd.scarolina.edu (Ken Yarnall) writes: >I have investigated, and found the following bug. VLT (v. 4.846) will crash >if you attempt to send a break to your Supre 2400zi. This is independent of >the processor you use (68000 or 68030), and does not occur if you use the >serial.device. Thus, I am leaning toward the possibility that the bug lies >in modem0.device, but I guess this hasn't been proved. Does Supra have a >net.presence? This bug is probably causing the problems that I reported >eariler between getty/VLT/modem0.device. I am still looking for answers. modem0.device may have yet another problem. Using Whap! V1.9C (the CIS automated telecomm program) I cannot upload files without incurring hundreds of read errors. Downloading is no problem. I am using the current release of modem0.device, but the problem seems to be apparent on earlier version of the driver. Of course, I don't know if it is the driver - just guessing at this point. -- /\ /\ //\\//\\ +---------^^^^------------------^^^^---------+ | From the shack of WA1OMM -- Paul MacDonald | | Using the power of the multitasking Amiga! | | | | Compuserve: 70411,626 PLink: UPPERCRUST | | Amateur Packet Radio: WA1OMM@KB4N.NH.USA | | Usenet: ...virgin!ubbs-nh!wa1omm!paul | +--------------------------------------------+ /\ / /\ (~ / / / / /\ /\ / / / / V /~~\ _) /~/ /_/ /~~\ , / V /~/