Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!sun-barr!cs.utexas.edu!wuarchive!zaphod.mps.ohio-state.edu!uakari.primate.wisc.edu!uflorida!gatech!mcnc!rti!mozart!sasjfp
From: sasjfp@unx.sas.com (Jeffrey L. Phillips)
Newsgroups: comp.sys.apollo
Subject: Re: sr10.3 report
Message-ID: <1990Nov16.182247.14214@unx.sas.com>
Date: 16 Nov 90 18:22:47 GMT
References: <4dc1a77e.1bc5b@pisa.ifs.umich.edu>
Organization: SAS Institute Inc.
Lines: 20

In article <4dc1a77e.1bc5b@pisa.ifs.umich.edu> rees@citi.umich.edu (Jim Rees) writes:
>I've just installed sr10.3.  The only thing that really tripped me up was
>that tcpd wouldn't run until I changed the line in the rc.local file from
>	/etc/tcpd >/dev/console
>to
>	/etc/tcpd
>
An addendum to the release notes for sr10.3 says that they have made signifigant
changes to /etc/tcpd.  So much so that it will not talk to any non-10.3 machines
unless it is run with the -c switch.  In other words, it needs to be:

       /etc/tcpd -c



-- 
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
"Just because I don't know what it means doesn't mean I'm lying." 

     Jeff Phillips             Email: sasjfp@dev.sas.com