Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!uakari.primate.wisc.edu!aplcen!haven!mimsy!mojo!russotto
From: russotto@eng.umd.edu (Matthew T. Russotto)
Newsgroups: comp.sys.apple2
Subject: Re: Mac Sound files --> iie
Message-ID: <1990Nov18.060912.7488@eng.umd.edu>
Date: 18 Nov 90 06:09:12 GMT
References: <1990Nov17.003256.28957@engin.umich.edu>
Sender: news@eng.umd.edu (The News System)
Distribution: na
Organization: College of Engineering, Maryversity of Uniland, College Park
Lines: 20

In article <1990Nov17.003256.28957@engin.umich.edu> clobot@caen.engin.umich.edu (Steve Roth) writes:
>Greetings // fans!  I'm interested in using the Macintosh
>sound files (Ones that can be set using the Control Panel as
>well as ones used in Sound programs.....sorry, I forget the 'proper'
>name) On my //.  (Output either to casette port or speaker)

These are 'snd ' resource files.  You will probably want to use a program
on the mac end to convert them to offset binary (also known as SoundCap
or 'FSSD' files).  The format of this file is quite simple-- it contains
positions of the speaker:
$00: fully in
...
$80: in the middle
$FF: fully out.

You have to convert this to one-bit to use your cassette port or speaker.
This is likely to give very poor results.
--
Matthew T. Russotto	russotto@eng.umd.edu	russotto@wam.umd.edu
     .sig under construction, like the rest of this campus.