Xref: utzoo comp.sys.atari.st:32695 comp.sys.atari.st.tech:756
Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sdd.hp.com!zaphod.mps.ohio-state.edu!sol.ctr.columbia.edu!emory!kd4nc!rbdc!mccann
From: mccann@rbdc (Mike McCann)
Newsgroups: comp.sys.atari.st,comp.sys.atari.st.tech
Subject: Re: Nec 1401PC3A Multisync, will it work?
Message-ID: <1990Nov21.030706.6347@rbdc>
Date: 21 Nov 90 03:07:06 GMT
References: <1990Nov16.220355.19927@lonex.radc.af.mil>
Organization: Red Barn Data Center Public Access Unix, Winston-Salem, NC.
Lines: 30

longj@lonex.radc.af.mil (Jeffrey K. Long) writes:

>I know this has been asked before, but then, I wasn't interested
>in the answer then since I didn't have access to the above mentioned
>monitor!!

>Will a Nec 1401PC3A multisynce work with the Atari ST??








Er, that number is not familiar to me. Is this the 3D, 4D, or 5D, Plus,

II, or original Multisync? If so yes. Is it the 2A? If so, NO. At least,

that's to my best guess. The 5D just MIGHT not work after all...

EOF
>Thanks!!

>-- 
>-----------------------------------------------------------------------
>Capt Jeff Long                         Rome Air Development Center
>longj@lonex.radc.af.mil                Network Design Laboratory
>jlong@cassiopeia.radc.af.mil           (315)330-7751 or (DSN)587-7751