Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!usc!wuarchive!mit-eddie!uw-beaver!zephyr.ens.tek.com!uunet!lpi.liant.com!drilex!wrglex!j_prigot
From: j_prigot@wrglex.uucp
Newsgroups: comp.sys.dec
Subject: Re: VAX 750 and RP06s
Message-ID: <87.2743a5f5@wrglex.uucp>
Date: 16 Nov 90 12:40:21 GMT
References: <15696@venera.isi.edu>
Distribution: na
Organization: W.R. Grace & Co., Lexington, MA
Lines: 12

In article <15696@venera.isi.edu>, britt@isi.edu (Benjamin Britt) writes:
> How does one connect a VAX 750 to one or more RP06s?  The Hardware
> handbook says to use an Massbuss adaptor (MBA).  Is this a board
> or set of boards?  Does it directly connect to an RP06?
> 

What you are looking for is the RH750. This is a set of 3 boards that install
in the 750's backplane. Make sure that your vendor includes the cables and
Massbus bulkhead connector.

-- 
Jonathan M. Prigot      j_prigot@wrglex or ...!drilex!wrglex!j_prigot