Path: utzoo!utgpu!watserv1!watmath!att!att!linac!pacific.mps.ohio-state.edu!zaphod.mps.ohio-state.edu!uakari.primate.wisc.edu!aplcen!haven!wam!mikec
From: mikec@wam.umd.edu (Michael D. Callaghan)
Newsgroups: comp.sys.next
Subject: Re: Modem hookup problems (2400 baud)
Message-ID: <1990Nov17.225851.6181@wam.umd.edu>
Date: 17 Nov 90 22:58:51 GMT
References: <1990Nov9.144735.12379@uunet!unhd> <56699@brunix.UUCP> <61@puma.cs.utexas.edu> <1990Nov17.180837.10533@news.iastate.edu> <1990Nov17.201513.7673@cs.cmu.edu>
Sender: usenet@wam.umd.edu (USENET Posting)
Organization: University of Maryland at College Park
Lines: 14

>Let me add that a Mac cable does not support DCD (carrier detect) 
>properly.  So you can't use one if you are concerned about dial 
>in.  But, if you only care about dial out, it should work ok, as was 
>pointed out.

If that is the case, what happens if you *ARE* concerned about dial-in?
Then where do you get a modem cable?

MikeC

--
___________________________________________________
Michael D. Callaghan,MDC Designs, University of Merryland
mikec@wam.umd.edu