Path: utzoo!utgpu!watserv1!watmath!att!att!pacbell.com!ames!ncar!boulder!gore!jacob
From: jacob@gore.com (Jacob Gore)
Newsgroups: comp.sys.next
Subject: Re: Modem hookup problems (2400 baud)
Message-ID: <130120@gore.com>
Date: 18 Nov 90 05:40:21 GMT
References: <1990Nov9.144735.12379@uunet!unhd>
Reply-To: jacob@gore.com (Jacob Gore)
Organization: Gore Enterprises
Lines: 13

/ comp.sys.next / olson@sax.cs.uiuc.edu (Bob Olson) / Nov 17, 1990 /
>    If that is the case, what happens if you *ARE* concerned about dial-in?
>    Then where do you get a modem cable?
>
> If you're willing to build one, look in the zs(4) manpage. The pin
> connections needed are there.

And if you do, I'd suggest you start with a Mac-to-modem cable and rewire
the DB25 side.  Those mini-DIN plugs are a major pain to solder wires onto...

Jacob
--
Jacob Gore		Jacob@Gore.Com			boulder!gore!jacob