Path: utzoo!utgpu!cunews!bnrgate!brtph3!brchh104!brchs1!bnr.ca!rice!sun-spots-request
From: shapiro@athos.rutgers.edu (Joel Shapiro)
Newsgroups: comp.sys.sun
Subject: Re: Does the SLC serial port (s) have modem control?
Keywords: Hardware
Message-ID: <303@brchh104.bnr.ca>
Date: 19 Nov 90 01:00:00 GMT
Sender: news@brchh104.bnr.ca
Organization: Sun-Spots
Lines: 7
Approved: Sun-Spots@rice.edu
X-Original-Date: 5 Nov 90 03:27:17 GMT
X-Refs:  Original: v9n357
X-Sun-Spots-Digest: Volume 9, Issue 368, message 2
X-Note: Submissions: sun-spots@rice.edu, Admin: sun-spots-request@rice.edu

I cannot tell you anything directly about a Tbit, but the manual gives the
pinout of the single DB25 connector of the SLC. From memory (I cannot look
at my files while reading news on a vt320, alas) port A had the usual
things on lines 2, 3, 4, 5, 6, 7, 8, 20, while port B had two of these
left out, and of course the signals available were on different pins. I
made a box to break the one port into two, successfully, but I doubt that
I really tested the modem lines.