Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!samsung!zaphod.mps.ohio-state.edu!wuarchive!emory!gatech!ncsuvx!news
From: johnson@ecovsh.eco.ncsu.edu (Amy Johnson)
Newsgroups: comp.unix.aix
Subject: MAXTOR disk drive on RS6000 problems
Keywords: RS6000, MAXTOR, scsi disk
Message-ID: <1990Nov20.162945.10050@ncsuvx.ncsu.edu>
Date: 20 Nov 90 16:29:45 GMT
Sender: news@ncsuvx.ncsu.edu (USENET News System)
Reply-To: johnson@ecovsh.eco.ncsu.edu
Organization: North Carolina State University
Lines: 17

Hi.  I'm trying to add a MAXTOR 700 MB SCSI disk drive to a RS6000 (320).
It boots up and recognizes the external disk as "Other SCSI disk", which
seems ok to me.  When I list the disk devices, it shows the new disk as
hdisk1.  BUT, when I try to give the new disk, hdisk1, a physical volume 
identifier number (in SMIT, under "Change Characteristics of a Disk"), it 
spits out the following:

	Method error (/etc/methods/chgdisk)
	0514-047 Cannot access a device

If anyone has ANY ideas or suggestions, I would love to hear them....Is this
disk totally unusable with this system???

Thanks!
Amy <johnson@ecovsh.eco.ncsu.edu>
Engineering Computer Operations
North Carolina State University