Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!cs.utexas.edu!uunet!virtech!cpcahil
From: cpcahil@virtech.uucp (Conor P. Cahill)
Newsgroups: comp.unix.sysv386
Subject: Re: Separate /usr/spool partition possible?
Message-ID: <1990Nov19.144409.13753@virtech.uucp>
Date: 19 Nov 90 14:44:09 GMT
References: <142@xyzoom.UUCP>
Reply-To: cpcahil@virtech.UUCP (Conor P. Cahill)
Distribution: usa
Organization: Virtual Technologies Inc., Sterling VA
Lines: 36

In article <142@xyzoom.UUCP> rob@xyzoom.info.com (Rob Lingelbach) writes:
> [story about renaming partitions deleted]
>
>My question is, has anyone done this with ISC 2.2

Yes this can be done.  All you have to do is edit /etc/fstab and change
the entry for /usr2 to /usr/spool.  If you want to avoid the warnings
about "mounting </usr2> as /usr/spool" then you should unmount /usr2
and run labelit(1M) to label the slice as usr/spool.

If you want a good breakdown of the steps you need to run to split
an already formatted diskette into multiple slices read the FAQP.

>If it's permissible, I intend to back up the system, then reinstall,

You don't have to reinstall unless the size of your root partition is
unacceptable SEE THE FAQP.

>(hopefully files from the old /usr/spool/ will go into the new
>/usr/spool/).

If you alread have the /usr2 partition all you need to do is the following:

	get your machine to single user mode
	cd /usr/spool
	mount /usr2
	find . -depth -print | cpio -pdvmu /usr2
	rm -rf /usr/spool/*
	umount /usr2
	vi /etc/fstab (to change /usr2 to /usr/spool)
	telint 2 (or 3 if you have networking)

-- 
Conor P. Cahill            (703)430-9247        Virtual Technologies, Inc.,
uunet!virtech!cpcahil                           46030 Manekin Plaza, Suite 160
                                                Sterling, VA 22170