Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sun-barr!newstop!sun!coherent!mrspoc!mrspoc!kayvan From: kayvan@mrspoc.Transact.COM (Kayvan Sylvan) Newsgroups: comp.unix.sysv386 Subject: ESIX: cu does not detect dropped line. Message-ID: Date: 22 Nov 90 09:32:15 GMT Sender: kayvan@mrspoc.Transact.COM (Kayvan Sylvan) Distribution: comp Organization: Transact Software, Inc., Los Altos, CA Lines: 28 I have the ESIX 5.3.2 D on a 386 with 4 Meg of RAM and a Fujitsu M2263E ESDI drive in it. It runs great!! I have a Telebit Trailblazer Plus modem hooked into COM1. In Devices, I have all the ``line'' references ending with ",M" and that should enforce the modem control. My Dialers entry starts with ``\M'' and ends with ``\m''. The problem: When I use cu to dial into another system, when I log out and the line is dropped, cu sits there still waiting for input. It's almost as if the modem control does not work. I have to do "~." to get back to the shell. Does anyone have any ideas? I read in this newsgroup (I think) that ESIX has a public access bulletin board. What is the number of that? Thanks in advance for your help! ---Kayvan -- | Kayvan Sylvan 879 Lewiston Drive W: (408) 978-1407 | | Sylvan Associates San Jose, CA 95136 H: (408) 978-1491 | | "If Donald Knuth had written X windows, it would be named Echhh windows." | | --- Marc De Groot |