Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!know!sdd.hp.com!caen!uwm.edu!csd4.csd.uwm.edu!info-high-audio-request
From: peteg%sequent.uucp@RELAY.CS.NET (Pete Gibson)
Newsgroups: rec.audio.high-end
Subject: Mods for Hafler 100 Power Amp
Message-ID: <7696@uwm.edu>
Date: 16 Nov 90 14:31:48 GMT
Sender: news@uwm.edu
Lines: 22
Approved: tjk@csd4.csd.uwm.edu
Originator: tjk@csd4.csd.uwm.edu


About 8 years ago I built a Hafler DH100 power amp from the kit.  Throughout
the years, it has suited my needs admirably.  'til now.  I am getting
increasing hum and hiss in both channels, and I assume it's due to aging
of important components and/or solder joints.  I would ideally like to
replace the Hafler with a better unit, but at this point my budget
(and wife ;-) won't allow it.

I've heard of good modification kits for the DH100, and would like to hear
from those who have experience, good or bad, with any of them.  Your help
is greatly appreciated.


Thanks,


Pete



peteg@sequent.sequent.com
..{uunet,ogicse,tektronix}!sequent!peteg