Path: utzoo!utgpu!watserv1!watmath!att!att!pacbell.com!ucsd!ucbvax!cpd.uva.es!fmerino
From: fmerino@cpd.uva.es (Francisco Merino)
Newsgroups: comp.protocols.iso.dev-environ
Subject: ISODE on HP X.25
Message-ID: <15*fmerino@cpd.uva.es>
Date: 28 Nov 90 16:33:00 GMT
References: <9011281507.AA01418@mcsun.EU.net>
Sender: daemon@ucbvax.BERKELEY.EDU
Distribution: inet
Organization: The Internet
Lines: 23


	Hello, Giancarlo.

	You are probably running HPUX operating system. The config
subdirectory contains the files hpux.make and hpux.h for the cconfiguration
of ISODE. The default options in this files are for TCP but you can easily
change it. The possible options are in the OPTIONS file in the same subdir.

	When you modify those files as appropiate (configuration), generation
of ISODE makes a transport layer -not standard, of course- which will run on
top of X-25. If the card is enabled you shouldn't have major problems after
instalation.

	I had to change some options for my HP-9000/350 and it worked, but
I had TCP, so I can't specify the options you need. It isn't difficult though.

				Good luck,


				Javier Simo and F. Merino
				Department of Systems Engineering
				University of Valladolid
		---------------------