Path: utzoo!utgpu!watserv1!watmath!att!linac!pacific.mps.ohio-state.edu!zaphod.mps.ohio-state.edu!julius.cs.uiuc.edu!apple!agate!ucbvax!DDOHRZ11.BITNET!UPH008 From: UPH008@DDOHRZ11.BITNET (Wilhelm Becker) Newsgroups: comp.protocols.tcp-ip.ibmpc Subject: Re: cutcp Message-ID: <9011290458.aa08032@louie.udel.edu> Date: 29 Nov 90 18:57:30 GMT References: Sender: daemon@ucbvax.BERKELEY.EDU Organization: The Internet Lines: 34 X-Unparsable-Date: Thu, 29 Nov 90 09:25:41 SET On Mon, 26 Nov 90 13:46:23 MET Hans M. Pronk said: >Hi i am having problems with CUTCP package. All things work fine except >for the ftp part. >We have a token ring lan with Novell software. >We are using the IPXPKT driver to use IPX as a transport layer for IP. >Between our token ring and the ethernet-segment we use KA9Q's net as >a IP router. >When using NET on the workstation's all things work fine. I have used it >ftp-ing realy large files, lots of users etc. >When using the ftp part from CUCTCP's Telbin or Ftpbin the IP router stops >working and only a reboot of the router can solve things! > I have the same problem with nearly the same configuration. The difference is that I use an ethernet instead of a token ring to carry Novell. The problem occurs, however, only with the new (beta) versions of CUTCP. The old 2.2TN version works without problems. It also seems to be host dependent. Ftping to an IBM VM system running Spartacus KNET works ok, ftping to a PCS Cadmus host claiming to run UNIX BSD 4.3 crashes on large files (more than ca. 500k) when transferring from the PC to the host. The other direction seems to be ok. Starting a packet driver trace in the workstation PC results an a hanging workstation instead of a hanging router and I can't get the trace out of the machine. If someone could help us ? Wilhelm Becker Grau, teurer Freund, ist alle Theorie, Und gruen des Lebens goldner Baum Institut fuer Physik Universitaet Dortmund Goethe, Faust I EARN: UPH008@DDOHRZ11.BITNET