Path: utzoo!utgpu!watserv1!watmath!att!dptg!ulysses!andante!mit-eddie!wuarchive!zaphod.mps.ohio-state.edu!ub!rutgers!cbmvax!daveh
From: daveh@cbmvax.commodore.com (Dave Haynie)
Newsgroups: comp.sys.amiga.hardware
Subject: Re: 1Meg Agnus fixes Was: Re: RAD: Problems (Won't Work)
Message-ID: <16092@cbmvax.commodore.com>
Date: 27 Nov 90 17:31:20 GMT
References: <5874@crash.cts.com> <1990Nov26.171840.24465@ericsson.se>
Reply-To: daveh@cbmvax.commodore.com (Dave Haynie)
Organization: Commodore, West Chester, PA
Lines: 24

In article <1990Nov26.171840.24465@ericsson.se> etxtomp@eos.ericsson.se writes:
>In article <5874@crash.cts.com> lkoop@pnet01.cts.com (Lamonte Koop) writes:

>A somewhat related question: After installing a 1Meg Agnus, should the
>program FastMemFirst still be in the Startup-Sequence? 

Assuming you actually change the jumpers to give you 1Meg of Chip RAM as well,
the FastMemFirst program becomes obselete.

>I have a 2000 with an A2620 (with 2Meg) + the old Commodore 2meg memory
>board. How will I make sure that the programs first use 32bit memory, then
>normal FAST and last CHIP ram?

The A2620 design assures that, by being the first autoconfig unit in the 
configuration chain.  The OS always orders memory of the same kind in the
order is was found in the configuration chain.

>Tommy Petersson


-- 
Dave Haynie Commodore-Amiga (Amiga 3000) "The Crew That Never Rests"
   {uunet|pyramid|rutgers}!cbmvax!daveh      PLINK: hazy     BIX: hazy
		      ONLY 230 MILES TO GO