Path: utzoo!utgpu!watserv1!watmath!att!linac!pacific.mps.ohio-state.edu!zaphod.mps.ohio-state.edu!wuarchive!uunet!overload!dillon From: dillon@overload.Berkeley.CA.US (Matthew Dillon) Newsgroups: comp.sys.amiga.tech Subject: Re: DNet and remote login (dumb console window) Message-ID: Date: 27 Nov 90 04:25:50 GMT References: <1229@tau.sm.luth.se> Lines: 36 In article <1229@tau.sm.luth.se> d88-mbe@sm.luth.se (Michael Bergman) writes: > >Anyway this is how to cure it: >Edit the file s:dnet.config. >At the top there are lines reading 'AUTA 19200 "CONNECT 1200"' and so on. >There is also a comment saying "Only scanned if option -a is used" >*THIS IS NOT TRUE(!!!)* - they are always scanned. This means that when the >modem writes "CONNECT 2400" or whatever, DNet sees it and scannes dnet.config >to see what baudrate it should use. > >Simply change the entried in dnet.config to read 'AUTA 2400 "CONNECT 2400"' >and so on. > >With this, my DNet finally works flawlessly. Thanks again, Matt (but you should >have written proper docs!!) > >Mike Well, nobody's perfect. Glad you found the solution to the problem though! -Matt >-- > Michael Bergman Internet: d88-mbe@sm.luth.se > // Undergrad. Comp. Eng. BITNET: d88-mbe%sm.luth.se@kth.se >\X/ U of Lulea, SWEDEN ARPA: d88-mbe%sm.luth.se@ucbvax.berkeley.edu > UUCP: {uunet,mcvax}!sunic.se!sm.luth.se!d88-mbe -- Matthew Dillon dillon@Overload.Berkeley.CA.US 891 Regal Rd. uunet.uu.net!overload!dillon Berkeley, Ca. 94708 USA