Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!uwm.edu!wuarchive!cs.utexas.edu!uunet!unsvax!uns-helios!alfter
From: alfter@uns-helios.nevada.edu (SCOTT ALFTER)
Newsgroups: comp.sys.apple2
Subject: Re: Datalink 2400 question
Message-ID: <2387@unsvax.NEVADA.EDU>
Date: 30 Nov 90 03:54:06 GMT
References: <7481@hub.ucsb.edu>
Sender: news@unsvax.NEVADA.EDU
Distribution: comp.sys.apple2
Organization: University of Nevada System Computing Services
Lines: 17

In article <7481@hub.ucsb.edu> basilisk@cornu.ucsb.edu writes:
>Is there an AT command to initialize an AE Datalink 2400 modem to 2400
>baud?  All the defaults seem to put it to 1200.  How can I initialize
>it to 2400?  Thanks in advance.

Try setting switch 4 on the modem to the closed position.  Better yet,
close all the switches; that is their factory setting.  There is no AT
command to set baud rate.  There is a ^A command to set baud rate, but
(1) most telecomm programs won't let you issue the command and (2)
most telecomm programs change baud rate automatically in accordance
with the baud rate returned in the CONNECT message.

-----------------------------------------------------------------------------
Scott Alfter                             _/_
                                        / v \ Apple II:
Internet: alfter@uns-helios.nevada.edu (    ( the power to be your best!
   GEnie: S.ALFTER                      \_^_/