Path: utzoo!attcan!lsuc!maccs!johns
From: johns@maccs.dcss.mcmaster.ca (Conan the Barbarian)
Newsgroups: comp.sys.atari.st
Subject: Re: UniTerm 2.0e dialer question
Summary: set Retries to non-zero
Message-ID: <27512FE0.27436@maccs.dcss.mcmaster.ca>
Date: 26 Nov 90 15:08:16 GMT
References: <2961@gmuvax2.gmu.edu>
Distribution: na
Organization: McMaster University, Hamilton, Ontario, Canada
Lines: 21

In article <2961@gmuvax2.gmu.edu> scoile@gmuvax2.gmu.edu (Steve Coile) writes:
>
>   Lately I've been trying to use Uniterm's dialer, and I'm having some
>problems.  I'll have it dial one number, and if it doesn't connect, and
>I hang-up, I can't change the number I want to dial.  In fact, I can't
>do ANYTHING (except to get it to dial again, and hang-up).  I tried
>pressing <CTRL/C> as it says in the manual, but it doens't do anything.
>
>Can anyone spare some advice on what to do?  As it is now, I'm stuck
>with rebooting (AAARRGH!).  Thanks!
>
>-Steve Coile

	There's a line in the Dialer Setup dialog box called "Retries:".
Set this to 1 or any positive number and that problem will be solved.  I
think zero in this line means try until you connect.

-- 
John Schmitt
johns@maccs.dcss.mcmaster.ca
...!unet!utai!utgpu!maccs!johns