Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!samsung!sol.ctr.columbia.edu!caen!math.lsa.umich.edu!math.lsa.umich.edu!hyc
From: hyc@math.lsa.umich.edu (Howard Chu)
Newsgroups: comp.sys.atari.st.tech
Subject: Re: Need RS232 configuration help...
Keywords: RS232 configuration
Message-ID: <1990Nov27.011538.29460@math.lsa.umich.edu>
Date: 27 Nov 90 01:15:38 GMT
References: <1990Nov27.003016.24863@rice.edu>
Sender: usenet@math.lsa.umich.edu
Organization: University of Michigan Math Dept., Ann Arbor
Lines: 12

In article <1990Nov27.003016.24863@rice.edu> bro@eunomia.rice.edu (Douglas Monk) writes:
>Any suggestions for the missing RS232 calls supported by the control panel
>but not present in Rsconf? (Besides "strip-bit", there is also duplex, etc.)

Strip-bit is redundant, specifying 8 bits/no parity is sufficient. Duplex
is handled by your application, not by the low-level RS232 routines. If you
want half-duplex operation all you have to do is echo everything the user
types.
--
  -- Howard Chu @ University of Michigan

Flame all you want - we'll take more.