Path: utzoo!utgpu!watserv1!watmath!att!dptg!ulysses!andante!princeton!udel!wuarchive!zaphod.mps.ohio-state.edu!usc!snorkelwacker.mit.edu!hsdndev!husc6!encore!encore.Berkeley.EDU!naresh
From: naresh@encore.Berkeley.EDU (Naresh Dharnidharka)
Newsgroups: comp.sys.encore
Subject: Re: Misc. Umax 4.3 Problems
Message-ID: <13351@encore.Encore.COM>
Date: 27 Nov 90 14:07:25 GMT
References: <1990Nov19.182329.868@cs.wright.edu>
Sender: news@Encore.COM
Reply-To: naresh@encore.com
Organization: Encore Computer Corp.
Lines: 21

In article <1990Nov19.182329.868@cs.wright.edu>,
dcourte@valhalla.wright.edu (Dale Courte) writes:
> 
> 3) Problems with the new 'date' program.
> 
>    The 4.3 date program does not seem to want to realize daylight
>    savings time. The paramter in /Umax.param is set to indicate EDT, but
>    date will only display EST. If I set the time and display it with the
>    old (4.2) date program, it displays one hour ahead of what the new
>    'date displays, and clearly indicates EDT, while new date will only
>    display EST.
> 
I believe if you do a "zic -d /usr/etc/zoneinfo -l EST5EDT" to set localtime
to EST5EDT it should solve your problem.

----
Naresh Dharnidharka
Encore Computer Corporation
Mach Softare Development Group
UUCP: {talcott,linus,necis,decvax}!encore!naresh
Internet: naresh@encore.com