Xref: utzoo comp.sys.ibm.pc.misc:4168 comp.sys.ibm.ps2.hardware:241
Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!caen!uflorida!gatech!ncsuvx!news
From: jumper@hobbes.ncsu.edu (Michael Lanham)
Newsgroups: comp.sys.ibm.pc.misc,comp.sys.ibm.ps2.hardware
Subject: Disk from model 30 wont be read in other machines
Message-ID: <1990Nov29.060240.11369@ncsuvx.ncsu.edu>
Date: 29 Nov 90 06:02:40 GMT
Sender: news@ncsuvx.ncsu.edu (USENET News System)
Distribution: comp
Organization: NCSU Computing Center
Lines: 20

I have some backup copies of my ALDUS PAGEMAKER 3.0 on 720 KB DS DD disks
formatted in my PS/2 model 30.  I used diskcopy to copy the originals
to the backups alos using the model 30 as the copy platform.

My problem is this: I tried to get my zenith 386sx to read the disks and
install the program and the install program refuses to recognize the 
PROGRAM/DICTIONARY disk.  DOS will get a dir from that disk, copy files, chkdsk
for bad sectors(none) but the PM INSTALL program wont read the disk.

WHY??????  I tried to use a friends model 50 (IBM PS/2) and his machine
would not read the second disk either.  All three machines read the INSTALL
disk but only my model 30 will read the other needed diskettes.

Help would be deeply appreciated

--
He who will not reason, is a bigot; he who cannot is a fool;
and he who dares not is a slave.      --- Sir William Drummond

Michael Lanham       mjlanham@eos.ncsu.edu   &  jumper@.catt.ncsu.edu