Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!cs.utexas.edu!uunet!world!boris From: boris@world.std.com (Boris Levitin) Newsgroups: comp.sys.mac.system Subject: Re: What is Radius SANE Init? Message-ID: <1990Nov24.074318.29811@world.std.com> Date: 24 Nov 90 07:43:18 GMT References: Organization: The World @ Software Tool & Die Lines: 27 sbchanin@ai.mit.edu (Steve Chanin) writes: >The system folder of the mac II I use at work contains an init called >Radius Sane (version 1.2). Does anyone out there know what this init >does? The machine has an Apple 13" RGB with Apple video card and so >far as I know never had a Radius Monitor attached. Like every other >mac II, it has an fpu and I recently stuck a PMMU into the machine to >run virtual, but in anycase, the radius init predates the PMMU. >Thanks for the info, >Steve >-- >=============================================================================== >DOMAIN: sbchanin@ai.mit.edu >USMAIL: Steven Chanin, 1010 Mass Ave #57, Cambridge, Ma 02138 >PHONE : (617) 876-1950 Many Mac applications which take advantage of FPUs send instructions to them directly (for example, MS Excel and Odesta DataDesk). Others use the Standard Apple Numeric Environment, which provides the less-efficient but cleaner or more politically-correct way of doing this. The Radius SANE INIT intercepts SANE calls and uses its own routines to call the FPU directly. Radius states that this significantly raises the efficiency of SANE-using programs' utilization of the FPU on its accelerator boards. Whether the INIT has any positive or negative effect on a machine equipped with an FPU not from Radius (such as a stock Mac II) I have no idea. Maybe some programmers or hardware people out there would care to clarify.